Corrective Maintenance Task

From GM-RKB
(Redirected from Corrective Maintenance)
Jump to navigation Jump to search

A Corrective Maintenance Task is a system maintenance task that reacts to a system failure.



References

2014

  • (Wikipedia, 2014) ⇒ http://en.wikipedia.org/wiki/corrective_maintenance Retrieved:2014-7-27.
    • Corrective maintenance is a maintenance task performed to identify, isolate, and rectify a fault so that the failed equipment, machine, or system can be restored to an operational condition within the tolerances or limits established for in-service operations. [1] A French official norm defines "corrective maintenance" as maintenance which is carried out after failure detection and is aimed at restoring an asset to a condition in which it can perform its intended function (NF EN 13306 X 60-319 standard, June 2001). [2]

      Corrective maintenance can be subdivided into "immediate corrective maintenance" (in which work starts immediately after a failure) and "deferred corrective maintenance" (in which work is delayed in conformance to a given set of maintenance rules).

  1. MIL-STD-3034 Reliability-centered maintenance (RCM) Process.
  2. "Maintenance exécutée après détection d'une panne et destinée à remettre un bien dans un état dans lequel il peut accomplir une fonction requise."


  • (Wikipedia, 2014) ⇒ http://wikipedia.org/wiki/Maintenance,_repair,_and_operations#Corrective_maintenance Retrieved:2014-7-27.
    • Corrective maintenance is probably the most commonly used approach, but it is easy to see its limitations. When equipment fails, it often leads to downtime in production. In most cases, this is costly business. Also, if the equipment needs to be replaced, the cost of replacing it alone can be substantial. It is also important to consider health, safety and environment (HSE) issues related to malfunctioning equipment.

      Corrective maintenance can be defined as the maintenance which is required when an item has failed or worn out, to bring it back to working order. Corrective maintenance is carried out on all items where the consequences of failure or wearing out are not significant and the cost of this maintenance is much greater than preventive maintenance.

      Corrective maintenance is the program focused on the regular task that will maintain all the critical machinery and the system in optimum operating conditions.

      The major objectives of the program are to

      1. 1.Eliminating breakdown
      2. 2.Eliminating deviation
      3. 3.Eliminating unnecessary repairs
      4. 4.Optimize all the critical planned system